Impinj Indy RS500 Reader SiP

产品详情：

Features:
> 23dBm maximum output power
> Rx sensitivity -65dBm
> Fail safe boot loader adds reliability
during field updates
> Firmware upgradeable to G2 (Gen 2 V2)
> Dense reader mode support
> Fully tested with worldwide compliance
> Small 30mm x 32mm surface mount package
> Shielded package to prevent unwanted radiation
and immunity to noise
> Easy system integration with new Impinj Radio
Interface (IRI), an asynchronous message-based
interface. IRI Tool Kit source code available
> Support for Monza? tag chip advanced features

Three simple connections
1. DC Power
2. UART Communication
3. RF Antenna

Air Interface Protocol:EPCglobal UHF Class 1 Gen2 / ISO 18000-63 (formerly 18000-6C)
with support for future G2 via firmware update
Output Power： 10 to 23 dBm
Rx Sensitivity： -65dBm sensitivity in DRM mode based on 1% packet error rate.
Sensitivity depends on carrier reflection from antenna. In most
cases, sensitivity will be better than -65dBm.
Power Modes： Active, standby and sleep modes
Power Consumption： 2.5 watts @ 23dBm
Operating Frequencies： GX: 902 - 928 MHz
EU: 865 - 868 MHz
Temperature Operating: -20 to +70 oC
Storage: -30 to +100 oC
RF Input and Output： 50 ohm